Lead by Inductively Coupled Plasma – Atomic Emission Spectrometry
ASTM E 1613.b

Lead Content, Atomic Absorption Graphite Furnace
EPA 7421

Lead in Gasoline by Iodine Monochloride Method
ASTM D 3341

Lead in Water
ASTM D 3559

Limestone Content
​TEX 406–A

Lithium and Sodium in Lubricating Greases by Flame Photometer
ASTM D 3340

Manganese in Gasoline by AA Spectrometry
ASTM D 3831

Maximum Size of Particulates in Gas, um
TOL SC 6028.b

Melting Point of Petroleum Wax
ASTM D 87

Melting Point of Petroleum Wax and Petroleum, Drop Melting Point
ASTM D 127

Mercury by Cold Vapor Atomic Absorption, Limit of Detection. LOD = 0.05 ppm
EPA 7040A

Mercury by Cold Vapor Atomic Absorption, LOD = 0.05 ppm
EPA 245.1

Mercury, by Cold Vapor Atomic Absorption, Liquid Waste
EPA 7470A

Mercury, by Cold Vapor Atomic Absorption, Solid Waste
EPA 7471A

Mercury, Total, in Coal by Acid Extraction/Cold Vapor AA
ASTM D 6414

Mercury, Total, in Coal by Direct Combustion Analysis
ASTM D 6722

Mercury, Total, in Coal by Oxygen Bomb Combustion
ASTM D 3684

Mercury, Total, in Water
ASTM D 3223

Metals Analysis, Examination of Water and Wastewater
Std M 3110

Metals and Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 6728

Metals by Atomic Absorption (AA). LOD = 0.05 ppm, per elementEPA 7000AMetals by Graphite Furnace Atomic Absorption Spectroscopy, GFAA. Includes: Vanadium, Sodium, Potassium, Lithium, Lead, and Calcium. LOD = 0.01 ppm
ASTM E 1184

Metals by ICP–AES, Semi–Quantitative Scan, 27 metals
ASTM E 1613.a

Metals by Inductively Coupled Plasma – Atomic Emission Spectroscopy (ICP–AES), on Soils, Sludge, Solids, and Petroleum Products. Includes: Arsenic, Cadmium, Chromium, and Lead. Limit of Detection. LOD = 1 ppm
EPA 6010B.1

Metals Content
EN 14538

Metals in Compounding Materials, Flame AA, per element
ASTM D 4075

Metals in Drinking Water Surface Waters or Industrial Wastewater, by ICP–AES
ASTM D 1976

Metals in Gas Oils by AAS; V, Fe, Pb, Cu, Na
UOP 848

Metals in Lubricating Greases by ICP–AES
ASTM D 7303

Metals in Petroleum Coke by Inductively Coupled Plasma Atomic – Emission Spectrometry (ICP–AES)
ASTM D 5600

Metals in Refuse–Derived Fuel by Atomic Absorption Spectroscopy
ASTM E 885

Metals in Water by Inductively Coupled Plasma – Mass Spectrometry, per element
EPA 6020

Moisture, Dry Basis, Calculated from As–Determined Basis
ASTM D 3180.a

Molecular Mass of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D 2503

Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High–Performance Size–Exclusion Chromatography
ASTM D 5296

Molecular Weight from Viscosity Measurements
ASTM D 2502

Molybdenum in Water
ASTM D 3372

Monomethyl Ether of Hydroquinone (MEHQ) in Acrylate Esters and Acrylic Acid
ASTM D 3125

MTBE, ETBE, TAME, DIPE, tertiary–Amyl Alcohol and C1 to C4 in Gasoline by GC
ASTM D 4815

Naphthalene Content in Aviation Turbine Fuels
ASTM D 1840

Nickel and Vanadium in FCC Equilibrium Catalysts by Acid Decomposition and Atomic
ASTM D 1977

Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma – Atomic Emission Spectrometry (ICP–AES)
ASTM D 5708

Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels
​ASTM D 5863

NitrateEPA 9200Nitrate and Nitrite, Colorimetric
EPA 353.4

Nitrite–Nitrate in Water
ASTM D 3867

Nitrogen Content by Ion Chromatography
UOP 939

Nitrogen in Petroleum and Petroleum Products
ASTM D 5762

Nitrogen in the Analysis Sample of Coal and Coke
ASTM D 3179

Nitrogen, (Ammonia), Colorimetric
EPA 350.1

Nitrogen, Organically Bound, by Chemiluminescence
ASTM D 4629

Organic Compounds in Water by Gas Chromatography and Mass Spectrometry (GC–MS)
ASTM D 4128

Organic Compounds, Purgables, by GC–MS
EPA 624
Oxidation Stability of Used Lubricants by FT–IR
ASTM D 7214

pH Measurement of Water of Low Conductivity
ASTM D 5464

pH of Aqueous Solutions with Glass Electrode
ASTM E 70

pH of Engine Coolants, Antifreezes and Anti–Rusts
ASTM D 1287

pH of Soils
ASTM D 4972

pH of Solid Wastes, Electrometric Measurement
EPA 9040B

pH of Waste by Screening Test
ASTM D 4980

pH of Water
ASTM D 1293

pH of Water Extractions of Halogenated Organic Solvents
ASTM D 2110

pHe of Ethanol, Denatured Ethanol and Fuel Ethanol
ASTM D 6423

Selenium in Water
ASTM D 3866

Silver in Water
ASTM D 3944

Solidification Point of Petroleum Wax
ASTM D 3948

Separometer Index, Water Separation Characteristics, Micro (WSIM or MSEP)
ASTM D 4045

Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM D 4056

Sulfur Compounds in Natural Gas and Gaseous Fuels by GC
ASTM D 5623

Sulfur Compounds in Light Petroleum Liquids by GC and Sulfur Selective Detection
ASTM D 5709

Strontium–90 in Water, by ICP–MS
ASTM D 5830

Solvents Analysis in Hazardous Waste Using Gas Chromatography
ASTM D 6071

Sulfur in Gasoline by Wavelength Dispersive X–Ray Fluorescence
ASTM D 6428

Sulfur, Total, in Light Hydrocarbons, Oxidative Combustion Method
ASTM D 6445

Carbon in Water
ASTM D 4839

Total and Organic Carbon in Water by Hi–Temp Oxidation, Coulometric Detection
ASTM D 4129

Total Carbon by CHN Analyzer
ASTM D 5291.b

Total Chemical Bound Nitrogen in Water by Pyrolysis
ASTM D 5176

Total Chlorides
EPA 9253

Total Chlorine in Coal by Oxygen Bomb Combustion, Ion Selective Electrode
ASTM D 4208

Total Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
ASTM D 6316

Total Dissolved Solids, TDS
Std M 2540C

Total Sediment by Hot Filtration, Procedure A
ASTM D 4870.a

Total Sediment by Hot Filtration, Procedure B
ASTM D 4870.b

Total Sediment in Residual Fuels
ASTM D 4870

Total Solids, TS
Std M 2540B

Total Sulfur In Fuel Gases
ASTM D 1072

Trace Element in Hazardous Waste Fuel, per element
ASTM D 5839

Trace Elements by Inductively Coupled Plasma in Water and Waste (ICP–AES), per element
EPA 200.7 CL

Trace Elements by Inductively Coupled Plasma, (ICP–AES), per element
EPA 200.7

Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM D 3683.b

Trace Elements in Coal and Coke Ash by Atomic Absorption: Beryllium, Chromium, Copper, Manganese, Nickel, Lead, Vanadium, and Zinc, per element
ASTM D 3683.a

Trace Elements in Coal, Coke, and Combustion Residues by ICP–AES, ICP–MS, and GFAA
ASTM D 6357

Trace Elements in Middle Distillate Fuels by ICP–AES
ASTM D 7111

Trace Elements in Waste Streams, by ICP–AES, per element
ASTM C 1111

Trace Elements in Water by Flame Atomic Absorption Spectrophotometry, 14 elements. LOD = 0.5 ppm
ASTM D 4691

Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry (GFAA). Includes: Sodium, Potassium, and Calcium. LOD = 0.01 ppm
ASTM D 3919.c

Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry (GFAA). Includes: Sodium, Potassium, Calcium, Iron, and Copper. LOD = 0.01 ppm
ASTM D 3919.d

Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry, (GFAA). Includes: Sodium and Potassium. LOD = 0.01 ppm
ASTM D 3919.b

Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry, per Element
ASTM D 3919.a

Trace Elements in Water by Inductively Coupled Plasma – Mass Spectrometry (ICP–MS), per element
ASTM D 4291

Trace Metals by ICP–MS Includes: Vanadium, Sodium, Potassium, Lithium, Lead, and Calcium. LOD = 0.01 ppm
ASTM D 5673.b

Trace Metals in Oils by Wet Ashing and ICP–AES
UOP 389

Trace Metals in Petroleum Coke by Atomic Absorption, per element
ASTM D 5056

Ultimate Analysis (C, H, N, S, O) for Coke and Coal (See test package for coal and coke).
ASTM D 3176


Customer Service:


Using Wet Chemistry and Spectral instruments such as ICP-MS, ICP, GCMS, FTIR,UV, Fluorescence Spectrometer, HPLC, LC-MS, Microscope, we do much more than listed below:
independent laboratory testing company

​Acid Number and Napthenic Acids by Titration

UOP 565


Acid Number of Naval Stores Products

ASTM D 465


Acid Number of Petroleum Products, Potentiometric Titration

ASTM D 664


Acid Number of Petroleum Products, Semi-Micro Color Indicator Titration

ASTM D 3339


Acid Number of Used Lubricating Oils by Semi-Quantitative Micro Determination

ASTM D 5770


Acid Number, Color-Indicator Titration (TAN)

ASTM D 974.a


Acid Wash Color of Industrial Aromatic Hydrocarbons

ASTM D 848


Acidity

IEC 62021


Acidity in Aviation Turbine Fuel, Acid Number

ASTM D 3242


Acidity in Vinyl Acetate and Acetaldehyde

ASTM D 2086

Acidity in Volatile Solvents and Chemical Intermediates
ASTM D 1613

Acidity of Benzene, Toluene, Xylene, Solvent Naphtha, and Industrial Aromatic Hydrocarbons
ASTM D 847

​Acidity of Halogenated Organic Solvents
ASTM D 2989.a

Acidity of Hydrocarbon Liquids and their Distillation Residues
ASTM D 1093

Acidity or Alkalinity of Water
ASTM D 1067

Active Sulfur in Cutting Fluid
ASTM D 1662

​Additive Elements in Lubricating Oils by Inductively Coupled Plasma - Atomic Emission Spectrometry (ICP-AES)
ASTM D 4951.a

Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma - Atomic Emission Spectrometry (ICP-AES)
ASTM D 5185

Adhesion of Solid Film Lubricants
ASTM D 2510

Aging
ASTM D 5739.c

Air and Other Non-condesables, Including Refrigerants
BB-F-1421 B.f

Alkalinity of Caustic Soda
ASTM E 291

Alkalinity of Halogenated Organic Solvents
ASTM D 2989.b

Alkalinity, Titrimetric, Phenolphthalein
Std M 2320

Alkyl Nitrate in Diesel Fuel by Spectrophotometry
ASTM D 4046

Aluminum and Silicon in Fuel by Ashing, Fusion and ICP-AES
ASTM D 5184

Antimony in Paint by AA Spectroscopy
ASTM D 3717

​API Gravity of Petroleum Products, Hydrometer Method (Density, Relative Density, Specific Gravity)
ASTM D 1298

​Apparent Density, Bulk Factor and Pourability
ASTM D 1895

Apparent Viscosity of Engine Oils, Cold Crank Simulator
ASTM D 5293

​Aromatic Carbon Content of Hydrocarbon Oil by NMR
ASTM D 5292

Arsenic and Selenium in Coal by AA/Hydride Generation
ASTM D 4606

Arsenic by AA Furnace Technique. LOD = 0.05 ppm
EPA 7060A

Arsenic in Paint
ASTM D 2348

Arsenic in Petroleum Stocks and Catalysts by Spectrophotometry
UOP 387

Arsenic in Water
ASTM D 2972

Ash Content of Adhesives
ASTM D 5040

Ash Content of Bituminous Products.
AASHTO T111

Ash Content of Engine Coolants and Anti-Rusts
ASTM D 1119

Ash in the Analysis Sample of Coal and Coke, wt%
ASTM D 3174.a

Ash, Sulfated Residue, Lube Oils and Additives
ASTM D 874

Ash Content of Petroleum Products
ASTM D 482

API Gravity, Hydrometer Method
ASTM D 287.a

Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
ASTM D 4382

Barium, Calcium, Magnesium and Zinc in Lube Oil by Atomic Absorption
ASTM D 4628

Base Number by Potentiometric Titration
ASTM D 4739

Base Number in New and Used Lubricants by Color Indicator Titration
ASTM D 5984

Base Number, Potentiometric Perchloric Acid Titration
ASTM D 2896

Beryllium in Water
ASTM D 3645

Biodegradibilty Test, OECD, by CO2 Evolution Test, DOC Analysis Measurement
OECD 301 B

Boiling Point
BB-F-1421 B.b

Boiling Point and Boiling Point Range by GC
DuPont F3205.b

Boiling Point Distribution of Crude Oils and Vacuum Residues by Gas Chromatography
ASTM D 7169

Boiling Point Distribution of Hydrocarbon Solvents by GC

ASTM D 5399

Boiling Point of Engine Coolants
ASTM D 1120

Boiling Point of Petroleum Products at Atmospheric Pressure
ASTM D 86.a


Boiling Point Range
​BB-F-1421 B.g

Boiling Range Distribution of Crude Petroleum, by GC
ASTM D 5307

Bromide Ion in Water, Ground Water, and Drinking Water
ASTM D 1246

Burning Quality of Kerosene, 16 hr and 48 hr
ASTM D 187

Butadiene Dimer and Styrene in Butadiene Concentrates by GC
ASTM D 2426

Cadmium in Water
ASTM D 3557

Calcium and Magnesium in Water
ASTM D 511

Calcium, Magnesium Content
EN 14538.a

Calcium, Magnesium, Potassium, and Sodium by Flame AA Spectrometry
ASTM D 5086

Carbon and Hydrogen in the Analysis Sample of Coal and Coke
ASTM D 3178

Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M
ASTM D 3238

Carbon, Hydrogen, and Nitrogen in Petroleum Products, Instrumental
ASTM D 5291.a

Chloride in Aqueous Sample
EPA 9212

Chloride in Coal
ASTM D 2361

Chloride in Refinery Waters
UOP 456

Chloride in Refrigerants
BB-F-1421 B.e

Chloride Ion in Engine Coolants
ASTM D 3634

Chloride Ions by Ion Chromatography
ASTM D 5542.a

Chloride Ions in Brackish Water, Seawater & Brine
ASTM D 4458

Chromium in Paint by AA Spectroscopy
ASTM D 3718

Chromium, Hexavalent, Dissolved (AA, Furnace)
EPA 218.5

Cobalt in Water
ASTM D 3558

Color, Visual
ASTM E 1478

Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D 3414

Copper Content by Atomic Absorption or GFA
AASTM D 1688

Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 6732

Corrosive Sulfur in Electrical Insulating Oil
ASTM D 1275

Corrosive Sulfur in Electrical Insulating Oil - Part A
ASTM D 1275.a

Corrosive Sulfur in Electrical Insulating Oil - Part B (48 hrs)
ASTM D 1275.b

Corrosivity, pH by Glass Electrode
EPA 9045C

Elemental Analysis Coal and Coke Ash by AA
ASTM D 3682

Elemental Analysis of Lubricants and Additives per element
ASTM D 4927

Extraction Procedure, Zero–Head Space, Purgables
EPA 3810

Flame Atomic Absorption Spectro (Consolidate FLAA). LOD = 0.05 ppm, per element
EPA 7000B

Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
ASTM E 681

Flash Point
DIN 51 755

Flash Point and Fire Point, Cleveland Open Cup
ASTM D 92.c

Flash Point by Small Scale Closed Cup Tester, (Ramp Method)
ASTM D 7236

Flash Point of Liquids by Small Scale Closed Cup Apparatus (Seta–Flash)
ASTM D 3278

Flash Point, Cleveland Open Cup
ASTM D 92.a

Flash Point, Continuous, by Closed Cup
ASTM D 6450

Flash Point, Small Scale Closed Tester, Seta–Flash, 32 to 230ºF Range
ASTM D 3828

Flash Point, Tag Closed Tester
ASTM D 56

Flash Point, Tag Open Cup
ASTM D 1310

Flash Point, Tag Open Cup, Cutback Asphalt
ASTM D 3143

Fluoride Content, Ion Selective Electrode
EPA 340.2

Fluoride Ion in Water
ASTM D 1179

Fluoride Ions in Brackish Water, Seawater, and Brines
ASTM D 3868

Fluorine, Total, in Coal by Oxygen Bomb Combustion
ASTM D 3761

Foam in Aqueous Media, Blender Test
ASTM D 3519

Hardness in Water
ASTM D 1126

Infrared Spectrochemistry; Fuel Soot, Oxidation, Nitration
TOL 5047.b

Infrared Spectrochemistry; Full Spectrum FT–IR
TOL 5047.a

Inorganics by ICP – Atomic Emission Spectroscopy, per element
EPA 6010B

Iron in Trace Quantities
ASTM E 394